OBJECTIVE for DQ of Induction Sealing Machine
To determine that the DQ of Induction Sealing Machine perform as intended by repeatedly running the system on its intended schedules and recording all relevant information and data. Results must demonstrate that Design consistently meets per-determined specifications under normal condition, and where appropriate the worst case situations.
TABLE OF CONTENT
Description |
Objective |
Table of contents |
Scope |
Pre-Approval of Documents |
Responsibility (client and manufacturer) |
Scope of supply |
Brief process description |
Technical specifications |
Safety features and alarms |
Technical specifications of the bought out components |
Post approval of Documents |
List of Abbreviations |
SCOPE
The scope of this qualification document is to perform the Design qualification to verify the installed components as described in DQ.
PRE APPROVAL OF DOCUMENTS
Prepared by
Designation | Name | Date | Signature |
Executive/Officer Engineering |
Reviewed By
Designation | Name | Date | Signature |
Head Engineering | |||
Head Production |
Approved by
Designation | Name | Date | Signature |
Head QA |
RESPONSIBILITY:
Customer:
To provide the Scope of supply.
To give final approval to drawing and technical data sheet.
Manufacturer:
To design, engineer and provide complete technical details of the Equipment.
To confirm safe delivery of the equipment to the user site.
To ensure that no un-authorized and/or unrecorded design modifications shall take place. If at any point of time, any change is desired by mutually agreed design, change control procedure shall be followed and documented.
SCOPE OF SUPPLY:
Design of the machine shall meet the Scope of Supply finalized with the Customer.
To define the customer’s & the manufacturer’s responsibilities.
To provide the brief process description of Disintegration Test Apparatus.
To provide the machine description.
To provide the technical Specifications of the machine.
To provide the information on bought out components.
BRIEF PROCESS DESCRIPTION for for DQ of Induction Sealing Machine:
The Technology of heating sealing the aluminium plastic multiplex material by electromagnetic induction is the advanced and popular sealing technology of the word.The electromagnetic induction sealing machine manufactured of this principle is becoming the necessary equipment of medicine, pesticide, axunge, by product, health-care, costing, chemistry and other trade requires high quality air sealing for plastic, glass and other non-metal bottle. To improve the level of the product, the sealing and quality protection function , anti-pirate and anti- forgery.
The Machine is comply with the principle of metal object can brings grand bow wave to heat under the action of the high frequency electromagnetic field, making the aluminium foil hot and melt the binding under the aluminium foil then agglutinate to the the mouse of the bottle, thus to accomplish the constant quick non- contact sealing operation.
TECHNICAL SPECIFICATION for for DQ of Induction Sealing Machine:
Sr. No. | Utility/ Parameter | Specification |
1 | Electrical Utility | Voltage: 220 VAC ± 5% |
2 | Frequency: 50 Hz ± 2% | |
3 | Connection: 3 Wire | |
4 | 1500 Watt, Phase: 1 Phase, 1 Neutral,1Earthing | |
5 | Dimenssion | 115X48X40 cm |
6 | Encloser Protection grade | IP21 |
7 | Sealing Diameter | 20 mm to 50 mm |
8 | Height of the Bottle | 40-200 mm |
SAFETY FEATURE & ALARM
Safety feature | Function | Identified by/Date |
Electrical Insulation | Safety | |
Earthling | To avoid the shock |
TECHNICAL SPECIFICATION OF THE COMPONENT
A) Equipment structure:
Sr.No | Description | Specified | Method of verification | Actual | Checked by |
1 | Make/Model | LGYF-2000 AX-I | |||
2 | Specification | MS Powder Coated |
- Instruments Requiring Calibration
Sr. No. | Instrument | Location | Model no. | SR. NO. | Yes/No |
1 | Volt Meter | OPERATING PANEL | 85 LI | GB/T7676-98 | |
2 | Ampere Meter | OPERATING PANEL | 85 LI | GB/T7676-98 |
POST APPROVAL OF DOCUMENTS
Prepared by
Designation | Name | Date | Signature |
Executive/Officer Engineering |
Reviewed By
Designation | Name | Date | Signature |
Head Engineering | |||
Head Production |
Approved by
Designation | Name | Date | Signature |
Head QA |
LIST OF ABBREVIATIONS
ENG | Engineering |
IQ | Installation Qualification |
DQ | Design Qualification |
ISM | Induction Sealing Machine |